Fostex DV-40, Service Manual

Page: 5 / 92

5
Service Manual
Ethernet port 44.1 / 48 kHz
Connector RJ-45
Format Comply to IEE802.3, 10BASE-T & 100BASE-TX standards
LED indication
10/100 LED is on when connecting to network via 100BASE-TX.
LED is off when connecting to network via 10BASE-T
LINK LED is on when network is recognized.
TX/RX LED is on when transmitting / receiving data.
Video Input
Connector BNC type
Reference input level TTL level (with 75
Ω
termination switch)
Video Thru Direct output of video input
Connector BNC type
9P-REMOTE (RS-422) *
Connector D-DUB 9-pin
Protocol Comply to SONY 9-pin (P2) protocol
DV40 works as a controlled device only.
Pin assignment Refer to the drawing on page 7.
15P-REMOTE (RS-422) *
Connector D-DUB 15-pin
Protocol Comply to SONY 9-pin (P2) protocol
DV40 works as a controlled device only.
Pin assignment Refer to the drawing on page 7.
Word Input**
Connector BNC type
Reference input level TTL level (with 75
Ω
termination switch)
Word Output**
Connector BNC type
Reference output level TTL level
Word Thru Direct output of word input
Connector BNC type
PS/2 Port (x 2)***
RECORD & REPRODUCE
Recording Medium DVD-RAM drive (E-IDE standard)
2.5” hard disk (optional)
Fs & Resolution 16-bit: 44.1 kHz / 48 kHz
24-bit: 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz
Crossfade Time 10 msec (default)
OPERATION
Locate Memory
Memory in machine 100 points
Memory in file (Cue Point Chunk/ Region Rec)
100 points
DISPLAY
28 dots bargraph meter x 4 with selectable reference level,
16 digits 7 x 5 character display, 13 digits 7-segment time display