1
<Step 1>
Unfasten the screws for fixing top panel, front panel, bottom panel and
right side panel in order (see figures 1 through 4 below).
Instructions for installing the ATC-4
Follow the procedure below for installing the optional ATC-4 (AATON in-
terface) to the PD-6.
Top panel (7 screws)
Bottom side (7 screws)
<Figure 1>
<Figure 2>
<Note>
Before installing the ATC-4, make sure to turn off the power of the unit (i.e.
unplug the connector of the AC adaptor, or remove the internal battery.)
Back side (3 screws)
Back side (3 screws)
Bottom panel
