10
H
・
・
LINE
80
160
Reducing the frequency range of 80Hz and
below.
Reducing the frequency range of 160Hz and
below.
HPF (High Pass Filter) Switch
Used to reduce low frequency noise such as wind blow on
the microphone or hum noise generated by AC power facility.
* Attenuation: -6dB/oct.
GAIN Switch and PEAK Indicator
Used to adjust the microphone amp gain according to the
microphone sensitivity. Set the GAIN switch appropriately
referring to the PK (PEAK indicator) LED and the input level of
equipment connected to OUTPUT.
MIC Sensitivity (dBu)
-60
-45
-30
-20
GAIN (dB)
+64
+49
+34
+24
* When the GAIN is adjusted properly acccording to the chart
above, the nominal level will appear via OUTPUT connector.