10
www.fosterrefrigerator.com
Always ensure air can circulate around/through the stored product. It is important that for
optimum energy and temperature performance that adequate airflow is maintained around
the perimeter of the shelves, and around all stored products.
40
KG
Defrost
The appliance has an automatic defrost function and will defrost periodically each
day without any user intervention. This process is normal and does not affect product
stored in the appliance. During defrost the appliance can be used as normal.
To start a defrost manually press and hold button 3 for 5 seconds. This will turn off the
appliance. When this happens do not release the button and after 2 more seconds
the display will indicate a defrost has commenced (icon 4 illuminated) and the button
can be released.
Keypad Security Settings
We advise that this function is used to prevent unauthorised adjustment of the appliance and it’s operating
temperature.
Press and release button 3. Then press button 1 followed by button 4 to display ‘Loc’. Press button 3 and use
buttons 2 and 4 to change the value to ‘Yes’ to lock the keypad or ‘no’ to unlock it. Press button 3 to save the
new value. If button 3 is not pressed the new value will not be stored.
The display will reset after 30 seconds or by pressing button 1.
Shelves, Supports, Loading and Air Flow
The appliance is supplied with adjustable, removable trayslides and shelves.
Each shelf is capable of holding up to 40kg of product evenly distributed.
Do not block air vents with product. A minimum of 25mm should be maintained
between the top of the product and the shelf above.
Do not place product on the base of the appliance. If it is required to store product on
the base of the appliance please contact the Foster parts team to purchase the necessary
shelf and spacers.
Set Point
To display the appliance Set Point, with the display showing the temperature, press button 3. Then press
button 1 and with the display showing ‘SP’ press button 3.
To amend the Set Point press button 3. Then press button 1 and with the display showing ‘SP’ press button 3.
Adjust using button 2 and button 4. Press button 3 to save the new value. If button 3 is not pressed the new
value will not be stored.
If the Set Point cannot be adjusted to the value required please contact your authorised Foster dealer for
advice.
The display will reset after 30 seconds or by pressing button 1.
