![Foster CT75 Operation Instructions Manual Download Page 4](http://html1.mh-extra.com/html/foster/ct75/ct75_operation-instructions-manual_2323528004.webp)
GB
3
The cabinet has fixed positions for the shelving incorporated in the side air ducts.
Door Open Alarm
The door alarm will sound if the door is left open for more than 5 minutes when the
programme is running.
The display will continue to display the alarm message until cancelled by shutting the door.
If the alarm cannot be cancelled by doing this call your Foster Authorised Service
Company.
High Temperature Alarm
If the cabinet temperature remains above 10°c for more than 90 minutes whilst in the
storage mode the alarm will
Air Probe Alarm
In the event of the probe failing the alarm will sound and the display will show probe fault.
Contact your Foster Authorised Service Company.
Power Failure
If the power fails for up to five minutes the unit will re-start on the resumption of the
power supply without affecting the selected cycle.
If the power is off for longer than five minutes the controller will enter the hold mode.
It is at the user’s discretion whether the stock is kept or disposed of depending on the
length of the time the cabinet had no power
Important: Before cleaning the power supply should be turned off at the mains.
Cared for correctly, stainless steel has the ability to resist corrosion and pitting for many
years.
The following weekly cleaning regime is recommended:
a.
Exterior: use a proprietary stainless steel cleaner following the manufacturer’s
instructions.
b.
Interior: Wash with soapy water, rinse with clean water and dry thoroughly.
WARNING:
High alkaline cleaning agent or those containing bleaches, acids and chlorines are very
harmful to stainless steel. Corrosion and pitting may result from their accidental or
deliberate application. If any of these liquids should come into contact with the unit during
general cleaning, wipe down the affected area with clean water and rub dry.
Never use wire wool or scouring powders on stainless steel or aluminium surfaces.
After cleaning allow the unit to reach its normal operating temperature before reloading
with product. During usage all spills should be wiped clean immediately.
Door Gaskets
These should be inspected on a regular basis and replaced if damaged. To clean, wipe with
a warm damp soapy cloth followed by a clean damp cloth and finally thoroughly dry before
shutting the door.