13
STEP 3
-3A-
Note the desired size * mentioned
in 2A between the bottom edge of
the hood and the top of the sliding
frame by pulling it upwards after re-
moving the screws (
V
) that lock the
inner frame into place.
-3B-
Secure the frame in the desired po-
sition with the screws (
V
), 2 on each
side = 8 in total. PLEASE NOTE:
there are 3 holes on each side, do
not use the hole in the middle.
--Caution:
- the holes in the frame have a 15 mm
pitch, so use the ones closest to the
desired size;
- a suitable notice reports the MAX height
that can be obtained by ensuring the
rigidity of the frame.
STEP 4
-4A-
Finding the central area to fix the hood to the ceiling.
-4B-
Use the designated template to mark the centres of the 4 holes.
-4C-
Drill with a 10 mm drill bit.
-4D-
Insert the Fischer rods and tighten the special threaded rods
with the designated “TORX SPANNER” insert (
T
) supplied.
EN
Fig. 3
Fig. 4
V
V
*
FISHER Ø 10
Ø 380
