22
Booster function
The booster function [ B ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones works during 10 minutes with an ultra high power.
The booster is foreseen for example to heat up rapidly big quantities of water, like for noodles
cooking.
Start up / Stop the booster function :
Action
Control panel
Display
Zone selection
Press key [ + ] from the zone
[ 0 ]
Increase power
Press key [ + ] or [ - ]
[ 1 ] to [ 9 ]
Start up the booster
Press key [ B ]
[ P ] during 10 min
Stop the booster
Press key [ - ]
[ 9 ]
or press key [ B ]
[ 9 ]
The booster function [ B ] can also be started directly :
Action
Control panel
Display
Zone selection
Press key [ + ] from the zone
[ 0 ]
Start up the booster
Press key [ B ]
[ P ] during 10 min
Stop the booster
Press key [ - ]
[ 9 ]
or press key [ B ]
[ 9 ]
Power management :
The whole cooking hob is equipped by a maximum of power. When the booster function is
activated, and not to exceed the maximum power, the electronic system orders to reduce
automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of power allowed ( [ 6 ] or [ 8 ] ).
Heating zone selected
The other heating zone: (example: power level 9)
[ P ] is displayed
[ 9 ] goes to [ 7 ] or [ 8 ] depending the type of zone
Timer
The timer is able to be used simultaneous with all 3 or 4 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
Setting and modification of the cooking time :
Action
Control panel
Display
Zone selection
Press key [ + ] from the zone
[ 0 ]
Increase power
Press key [ + ] or [ - ]
[ 1 ] to [ 9 ]
To select « Timer »
Press key [ ]
Timer [ 00 ] min
Decrease the time
Press key [ - ]
[ 00 ] goes to 60,59…
Increase the time
Press key [ ]
The time increases
After a few seconds the control light stops with blinking.
The time is confirmed and the cooking starts until the time reaches [ 00 ].
