background image

432964

Fault:

Cause/Remedy

Bulb replacement:

 • Before replacing the light bulb, disconnect the appliance form the
   power supply (pull the power cord from the wall socket). 
   A – Use the screwdriver to press the locking hook (in arrow
   direction), and remove the cover.
   B – Insert the screwdriver into the cover slot, lift it and remove the
   cover. 
   Replace the bulb with the equivalent new bulb (E 14, same 

voltage as the original one) and replace the cover back to its 
position.

 • Don’t forget: the old bulb does not belong to organic waste.
 • Light bulb is consumption material and is not covered by the 

warranty!

 • Bulb lamps used in this appliance are special purpose lamps 

selected for household appliances use only. They are not suitable 
for household room illumination.

Signal light 

B

 is 

fl

 ashing:

 • If the signal light 

B

 is 

fl

 ashing, call a service technician.

Error code indicated on 
the display (only with some 
models):

 • If “

E

” appears on the display, call a service technician.

If none of the above reasons seems to match your problem, please contact the nearest service
center and state the type, model and serial number as indicated on the label with basic information
attached in the appliance interior.

The refrigerator – freezer appliances are cooled by the refrigeration system with a compressor 
(assisted by fan in certain models) whose operation may produce certain noise. The level of such 
noise depends upon the location, correct use and age of the appliance.
• 

After starting the appliance,

 the operation of the compressor (the refrigerant 

fl

 ow) may be 

somewhat louder. This does not mean that something is wrong with the appliance, neither has 
it any in

fl

 uence on the lifetime of the appliance. Gradually the noise is reduced and eventually 

subsides.

•  Sometimes the appliance produces 

unusual and stronger noise

 which is rather unusual for the 

appliance. This noise is often the consequence of inadequate positioning of the appliance:

 

- The appliance should be placed and leveled 

fi

 rmly on solid base.

 

- It should not touch the wall or adjacent kitchen units standing next to it.

 

- Check whether the accessories in the interior of the appliance are placed correctly in their 

positions; also check the bottles, tins and other vessels that might touch each other and rattle.

THE MANUFACTURER RESERVES THE RIGHT TO 

ALTER THE SPECIFICATIONS WITH NO IMPACT TO THE 

FUNCTIONAL OPERATION OF THE APPLIANCE.

21

Noise level

Summary of Contents for 2033 000






















Reviews: