Package Contents
Fosi Audio TDA7498E Amplifier*1
AC Power Cord*1
24V Power Supply*1
User Manual*1
Quick Setup
Step 1:
Prepare TDA7498E, 24V power supply, passive speakers,
speaker wires or banana plugs;
Step 2:
Connect the TDA7498E to the passive speakers, you can
connect the speaker's wire via the bare wire or banana
plugs;
Step 3:
Connect the 24V power supply to the DC Input;
Step 4:
Toggle the power switch on the front panel upwards to
turn on the TDA7498E amplifier.
Note1:
Before connecting the power supply, please make sure that
the TDA7498E is in the “OFF” position when connecting to
the power adapter. Otherwise, there is a “POP” click sound
from your speakers.
Note2:
Before connecting the power supply, please turn down the
volume control to 0 (always rotating counterclockwise) to
avoid your hearing from damage.
How to connect the speaker wire?
Method 1: Bare wire connection illustration
: Release the horn terminals block terminals;
: Insert the two ends of the speaker wire into the
amplifier and speaker terminal holes;
: Tighten the horn terminals;
Method 2: Banana plugs connection illustration
: Release the banana jacket;
: Loosen the screw;
: Insertion speaker wire and tighten the screw;
: Tighten the banana jacket;
: Insert the banana plug into the horn terminals of the
speaker and amplifier.
Note:
Please make sure that the speakers’ wire are not attached
with each other, the speaker connection area is very
narrow, it is easy to cause the positive and negative
speakers’ wires to contact each other, which will result in
no sound output.
Note:
Please make sure that the speakers’ wire are not attached
with each other, the speaker connection area is very
narrow, it is easy to cause the positive and negative
speakers’ wires to contact each other, which will result in
no sound output.
1
2
3
4
5
1
2
3
Release Jacket
Loosen Screw
Insertion speaker wire
tighten screw
Tighten Jacket
1
2
3
4
banana plug into
the horn terminals
5