Q: Why do loudspeakers make a lot of electric noise?
A: if you are not using the original factory standard power supply, please replace the power supply
before testing.Many power supply in the market have large interference coefficient, which will
cause a lot of current sound.
Q: Why connect signal line, not play music have interferential sound
A: If you use unshielded signal lines, there will be interference signals entering the power
amplifier. If you hate the sound, you are advised to use the shielded signal lines or unplug the
signal lines.
Q: Why does the amplifier stop working after a period of time?After a period of time off, it was
working again
A: Normally in this case, the amplifier is overheat protected, and the output power may have
exceeded the designed power, so you can lower the volume a little and try again.
Q: why does the volume of the machine stay the same, while the sound of different audio sources
(such as CDS and mobile phones) is different?
A: The output range of different types of audio source devices is different, the mobile phone
is usually 0.35mV, and the CD is 1V.The signaloutput amplitude of the sound source will directly
influence the volume
Q: Whythe sound of the power amplifier is not very good at the beginning, the high frequency is
not clear, but after working for 8 hours the sound is normal?
A: Speaker and amplifier is a very sensitive equipment, also need to know each other, and the
matching process, usually thesound will be good after the new power amplifier and the speaker
work more than ten hours
Warning:
1. Please do not open the shell without permission. Improper operation may cause the danger of
electric shock.
2. Please use the power supply of the regular manufacturer, otherwise it will damage the machine.
3. Please do not use the machine in a high temperature and humidity environment.