Package Contents
Fosi Audio BT20A Amplifier*1
AC Power Cord*1
24V Power Supply*1
Bluetooth Antenna*1
Instruction Manual*1
Quick Setup
Preparation
Prepare 1:
BT20A, 24V power supply, passive speakers, speaker
wires or banana plugs;
Prepare 2:
Connect the BT20A to the passive speakers via the
speaker wire or banana plugs;
Prepare 3:
Connect the 24V power supply to the DC input;
Prepare 4:
Toggle the power switch on the front panel upwards to
turn on the BT20A amplifier.
Note:
Be sure that the volume/power switch is in the OFF position
before connecting the power supply.
How to connect the speaker wire?
Method 1: Bare wire connection illustration
: Release the horn terminals block terminals;
: Insert the two ends of the speaker wire into the
amplifier and speaker terminal holes;
: Tighten the horn terminals;
Note:
Please avoid the speaker wires being exposed and touching
the amplifier casing, as this may cause a short circuit fault.
1
2
3