Fosi Audio BT10A, User Manual, Page: 4 / 12

Package Contents
Fosi Audio BT10A Amplifier*1
AC Power Cord*1
19V Power Supply*1
Bluetooth Antenna*1
User Manual*1
Quick Setup
Preparation
Prepare 1: BT10A, 19V power supply, passive speakers, speaker
wires or banana plugs;
Prepare 2: Connect the BT10A to the passive speakers via the
speaker wire or banana plugs;
Prepare 3: Connect the 19V power supply to the DC input;
Prepare 4: Twist the power knob in a clockwise direction, turn on
the BT10A amplifier.
Note: Be sure that the volume/power switch is in the OFF position
before connecting the power supply.
How to connect the speaker wire?
Method 1: Bare wire connection illustration
: Release the horn terminals block terminals;
: Insert the two ends of the speaker wire into the
amplifier and speaker terminal holes;
: Tighten the horn terminals;
Note: Please make sure that the speakers’ wire are not attached
with each other, the speaker connection area is very
narrow, it is easy to cause the positive and negative
speakers’ wires to contact each other, which will result in
no sound output.
1
2
3