When the connection is completed, Please turn on the BOX X3
first, then turn on the amplifier(or powered speakers), at last
turn on your turntable or other audio source, then enjoy.
Note:
If you turn on the amplifier(or powered speakers) first,
then turn on the BOX X3, there is a “POP”click sound
from your speakers, it is normal that all the phono
preamp have the same issues, please don’t worry about
it, the “POP”click sound will not damage your amplifiers
or speakers.
Troubleshooting/QA
1: Get noise/humming when turn the BOX X3 on?
• Please know that when no inputs connected to BOX X3, the
default input way is MM input mode, in this mode, the gain of
the amplify is much large then other input modes, so it’s
normal that will have some humming sound when no sound
pass through.
• Please unplug all the inputs from the BOX X3, then turn it on to
check if the noise still or not.
• If the noise disappear, the noise may from the the audio source
or audio cable, please exchange the audio source and the
audio cable to try again.
• If the noise still, the noise may from BOX X3 or amplifier/
speakers:
• Please exchange the audio cables and amplifier(powered
speakers) to have a try and make sure that the noise is from
which devices.
• Please volume down the “Treble” volume on the BOX X3 to
check if the noise volume follows or not.
Note2:
MM Turntable Input can only be connected to the
turntable, and cannot be used as a normal preamplifier
connected to other audio sources, such as mobile
phones, MP3, etc.
(2):
3.5mm Input: Use a 3.5mm Audio cable to connect the BOX
X3 and your device.
Note:
Once 3.5mm AUX plug in ,the MM input will automatically
interrupted, so the input mode will turn to 3.5mm AUX
input.
(3): Bluetooth Input: Turn on the Bluetooth on your device, then
select "BOX X3" for pairing, the input mode
indicator light will stays blue after a
successful connection.
Note 1:
Once Bluetooth is connected, the MM turntable input
and 3.5MM AUX input will be interrupted. If you want to
use the RCA input again, just disconnect the Bluetooth.
Input priority:
Bluetooth Input > 3.5MM AUX input > MM
turntable input.
Note 2:
Input Indicator Light : After BOX X3 is powered on,
the input indicator light on the front panel stays red
either 3.5MM AUX input or MM turntable input is
successfully connected, and the input indicator light on
the front panel of BOX X3 stays blue when Bluetooth
input is successfully connected.
Note :
Please keep the BOX X3 away from other electric
device. The BOX X3 can't use with a radio
simultaneously.
