Fosi Audio BL20C, User Manual, Page: 10 / 12

10: Can I bridge channel 1 and channel 2 to get 320watts?
• No, this amplifier can't be bridged.
11: Why does distortion occur?
• When the output power of the BL20C exceeds the normal output
power, there will be a large distortion. That means if you turn the
sound up too loud, distortion may occur. Please try turning the
volume down a little.
12: Why does my power indicator not light up?
• Please check that the AC power cord is securely connected to the
power supply and to an AC power outlet.
• Please check that the AC power outlet is supplying power, make
sure the power LED on the power supply will stay on.
• Please replace another power supply and try it again. 19-35V DC
power supply are suitable.
• If you make sure the power supply is defective, please contact us
for exchange.
13: How can I use BL20C to create a 2.1 Channel system?
• You can connect two passive speakers via "SPK OUT" and one
active subwoofer via "SUB OUT" to create a 2.1 Channel system.
• Please use a RCA cable to connect your active subwoofer to the
"SUB OUT" output port.
14: Can I connect Bluetooth and U-disk at the same time?
• No, when the U-disk plugs in, the Bluetooth connection will be
interrupted.
Input priority: U-disk Input > Bluetooth Input
15: How can I connect BL20C to TV?
• The RCA jack is the audio input on the back panel of the BL20C. It
can be connected to your TV via RCA cables.