57
Enable firewall, If you select Only allow access from these IP addresses and fill in 8 IP addresses at
most, only those clients whose IP addresses listed in the Only allow access from these IP addresses can
access the Network Camera. If you select Block access from these IP addresses, only those clients
whose IP addresses are in the IP list cannot access the Network Camera.
Click
Save
to take effect.
3.7.10 System
In this panel, you can backup/restore your camera settings, upgrade the firmware to the latest version,
restore the camera to default settings and reboot the device.
3.7.10.1 Back-up & Restore
Click Backup to save all the parameters you have set. These parameters will be stored in a bin file for
future use.
Click Browse and select the parameters file you have stored, then click Submit to restore the restore the
parameters.
3.7.10.2 System Upgrade
Click
Download the latest firmware
, you will see the following screen. And click
Save
to save the
firmware on your computer locally.
Your current firmware version will be displayed on your screen. You may go to the
Status
>
Device
Information
page to check for the latest firmware versions available.
Click
Browse
, choose the correct bin file and then click
System upgrade
.
Don't shut down the power during upgrading. After upgrading, you can see the upgrade result.
