Foscam FN8108H, User Manual, Page: 6 / 100

6
Procedure
1. The NVR needs to connect to the router rst, and assign an IP address to the IP
Camera. If the NVR is not connected to the router, it may appear that the NVR cannot nd
the IP Camera.
2. Connect your display to one of the video outputs (VGA or HD-OUT interface).
3. Connect an external storage device to the USB interface of the NVR as a backup.
4. Connect a mouse to the USB interface.
5. Some devices need to connect to your router using an Ethernet cable, including the
NVR, PC and IP Camera. 6. Connect the power adapter to the power input port.
Log In
1. Turn on the power switch on the rear panel. After the NVR starts up successfully, the
power LED and HDD LED indicators will turn green. The startup page is displayed on the
screen.
2. Change password . For your security, please set a new password for your NVR before
Log In.