NVR User Manual
www.foscam.com
44
Step3
Enable the
Enable
schedule record.
Step4
Set Recording schedule time of the channel.
You can choose a week, one day of a week, the certain time period for the recording.
For detailed procedure, please refer to
Motion Detection.
Step5
Click
Save
button to take effect.
-------End
3.4.3 Alarm
Motion Detection
Follow the steps to set the motion detection parameters. In the live view mode, once a motion
detection event takes place, the NVR can analyze it and perform many actions to handle it. Enable
motion detection function can trigger certain channels to start recording, or trigger full screen
monitoring, output alarm, send Email, upload FTP, buzzer alarm and so on.
In the live view mode, there are icons at the right bottom of the screen for each channel.
The Icon
indicate alarm was triggered.
The Icon
indicate the IPC is recording.
You can follow the steps to schedule a record which triggered by the detected motion.
Choose
(Parameter Configuration) > Alarm > Motion Detection
. The
Motion Detection
page is displayed.
