![Foscam FLC/F41 User Manual Download Page 6](http://html1.mh-extra.com/html/foscam/flc-f41/flc-f41_user-manual_2323028006.webp)
4
Foam Gasket
:
Post it behind the floodlight camera
Locking Nut
:
Adjust the horizontal direction of the Floodlight.
Adjustment Knob
:
Adjust the direction of the floodlight vertically.
Floodlight
:
Floodlight brightness up to 2600lum.
Washer
:
Lock the floodlight camera with screws.
Screw
:
Lock the camera.
Cap
:
After the screw is installed, it is used to plug the screw hole.
Locking Collar
:
Adjust camera angle.
Microphone:
Built-in Microphone.
Lens
: Fixed focus lens.
LED Indicator
:
Infrared LED for night vision.
Passive Infrared motion sensor
:
The Passive Infrared motion sensor is electronic devices which are used in
some security alarm systems to detect motion of an infrared emitting source, usually a human body.
Reset:
Press and hold on the reset button for 10 seconds. Releasing the reset button, the password will back
to the factory default administrator password.
Micro SD Card slot:
Supports up to 128GB SD card for storing the video.
Speaker:
Built-in speaker
NOTE:
There are up to two labels located at the bottom of the camera, this is an important feature of original
Foscam cameras. If your camera does not have labels, it may be a clone. Cloned Foscam cameras can not
use original firmware and are not eligible for warranty or technical services.
1.5 SD Card Management
The record files of the IP camera can be stored in the Micro SD Card.
This camera supports Micro SD Card and the max size of Micro SD card must be under 128G.
You need open the silicone plug, then plug the Micro SD card into Micro SD card slot inside the IP camera.
When you plug in the Micro SD card during the camera work process, please reboot the camera again, or else