Quick Installation Guide
V1.0
EQC00006
2
Hardware Introduction
1
Instructions
Note:
If your device fails to connect to the Wi-Fi using the
Setup Wizard, you can also use WPS mode connection.
Please refer to the User Manual on the Foscam website
at
http://www.foscam.com.
Package Contents
Model: C1 Lite
Quick Installation Guide
Warranty Card
IP Camera
AC Adapter
USB Power Cable
Quick Installation Guide
Model: C1 Lite
You can add the Foscam camera using a smartphone.
4
Wireless Connection
Micro SD Card Slot
Lens
Microphone
WPS/Reset
Power
EZLink
WLAN:
WLAN Password
:
Connect your phone to Wi-Fi and input Wi-Fi
password for camera to connect.
NPU5YHSZSADVC59D111ABZZZ
doc
QR Code UID
CONNECT
EZLink
Please put the QR code within the frame. Put the
barcode outside the frame to avoid interference.
Album
Scan
Tap here
Tap here
Tap here
Scan the
QR code
The camera will
play a sound
“Wireless
Connection
Succeed” .
Enter your Wi-Fi
password.
Tap ‘+’ to add new camera
Add New Camera
My Cameras
Tap to scan QR Code
Please scan the QR code on
your camera to add.
Setup Wizard
轻触扫描二维码
√
Connection succeeded
！
Tap the camera in the list to
watch live video.
Setup Wizard
Router
WiFi
SoftAP
Power light
Network light
Security Warning
Please change the password of your camera regularly,
and use the combination of numbers, letters and special
characters.
We recommend you to update your camera to the latest
firmware every three months, in order to ensure the
safety of your camera and have a better product
experience.
Please keep the username and password of your camera
safe, and do not tell them to others.
3
Download APP
To install the Foscam APP on your smartphone, you can
choose either of the following methods:
Before you continue, please note:
Make sure your wireless router is enabled DHCP, and
connected to internet
.
Make sure your smartphone is connected to your
wireless router and located near the camera.
Foscam
If you have a QR Code APP on your smartphone, scan
the code below.
Scan QR code
You can search the term “Foscam” directly on the APP
Store or Google Play Store. Then find the APP that
appears with the same icon as shown above, and install
it to your smartphone.
1.
Connect the camera with power and wait for a moment,
until the camera plays a sound “Hello, Foscam”.
2.
Make sure your smartphone is connected to your
wireless router.
3.
Run the Foscam APP on your smartphone, register a
Foscam Cloud account then log in. After the camera
plays the sound ”Ready for WiFi configuration”, please
follow the steps below to add your camera.
Download from App store