11
FOS 700
Operating Instructions
1 - INTRODUCTION.
Dear user. Thank you purchasing your FOS 700 lifter. We hope you will be very satisfied
with it.
This manual has been written so that you can understand how to effectively use the lift
and most importantly, so that you can use it safely. It is important that you fully read the
manual and follow the instructions carefully before using your lift. All FOS lifts undergo a
very strict quality control process during their manufacture.
So that your lift always works properly please only purchase original FOS parts from an
authorized distributor or dealer. The user waives all warranty rights if using parts other
than FOS or if the product is manipulated in any way by an unauthorized third party.
When requesting parts, please refer to the diagrams of this manual and quote the
serial number and year of manufacture located on your lifter.
2 - TECHNICAL SPECIFICATIONS.
FOS lifter, model K-40 has been designed for vertically lifting lighting, trussing etc in the
Professional sound and light sector. There is various supports or accessories available,
please refer to our website or catalogue.
2.1 - Max. load: 270 kg (595.25 lb)
2.2 - Min. load: 25 kg (55 lb)
2.3 - Max. height: 6.65 m (21.81’)
2.4 - Folded height: 1.78 m (5.84’)
2.5 - Work surface: 1.88 x 2.15 m (6.17’ x 7.05’)
2.6 - Folded base area:
46 cm x 60 cm (1.51’ x 1.97’)
2.7 - Weight: 144 kg (317.47 lb)
2.8 - Winch: 900 kg certified
2.9 - Cable: Steel DIN 3060. Tensile strength 180 kg/mm
2
. Anti-torsion & anti-corrosion
Ø6 mm cable diameter.
2.10 - Construction material: Alluminium profiles 6082T6.
2.11 - Antirust protection priming paint bathed black steel, covered with cured polyester
dust.
