FOS Technologies Tower 535, User Manual

Page: 9 / 16

9
FOS 650
Operating Instructions
1 - INTRODUCTION.
Dear user. Thank you purchasing your FOS 650 lifter. We hope you will be very satisfied
with it.
This manual has been written so that you can understand how to effectively use the lift
and most importantly, so that you can use it safely.
It is important that you fully read the manual and follow the instructions carefully before
using your lift. All FOS lifts undergo a very strict quality control process during their
manufacture. So that your lift always works properly please only purchase original FOS
parts from an authorized distributor or dealer. The user waives all warranty rights if using
parts other than FOS or if the product is manipulated in any way by an unauthorized third
party. When requesting parts, please refer to the diagrams in the back of this manual and
quote the serial number and year of manufacture located on your lifter.
2.- TECHNICAL SPECIFICATIONS.
The FOS 650 has been designed for vertically lifting lighting, trussing etc in the Profes-
sional sound and light sector. There is various supports or accessories available, please
refer to our website or catalogue.
2.1 - Max. load: 220 kg (485 lb)
2.2 - Min. load: 25 kg (55 lb)
2.3 - Max. height: 6.5 m (21.32’)
2.4 - Folded height: 1.82 m (5.97’)
2.5 - Work surface: 2.56 x 2.56 m (8.4’ x 8.4’)
2.6 - Folded base area: 47 cm x 47 cm (1.5’ x 1.5’)
2.7 - Weight: 90 Kg (198.4 lb)
2.8 - Winch: 450 kg certified (Long Handle)
2.9 - Cable: Steel DIN 3060. Tensile strength 180 kg/mm
2
. Anti-torsion & anti-corrosion
6 mm cable diameter.
2.10 - Construction material: Steel profiles EN 10305.
2.11 - Antirust protection priming paint bathed black steel, covered with cured polyester
dust.
2.12 - Five-profile telescopic system operated by steel cable driven by pulleys with metal
protected bearing pads. Adaptor Ø35 mm.