7
FOS 400
Operating Instructions
1 - INTRODUCTION.
Dear user. Thank you purchasing your FOS 400 lifter. We hope you will be very satisfied
with it.
This manual has been written so that you can understand how to effectively use the lift
and most importantly, so that you can use it safely.
It is important that you fully read the manual and follow the instructions carefully before
using your lift. All FOS lifts undergo a very strict quality control process during their
manufacture. So that your lift always works properly please only purchase original FOS
parts from an authorized distributor or dealer. The user waives all warranty rights if using
parts other than FOS or if the product is manipulated in any way by an unauthorized third
party. When requesting parts, please refer to the diagrams in the back of this manual and
quote the serial number and year of manufacture located on your lifter.
2.- TECHNICAL SPECIFICATIONS.
The FOS 400 lifter has been designed for vertically lifting lighting, trussing and other
materials in the professional light and sound sector.There is various supports or acces-
sories available, please refer to our website or catalogue.
2.1
- Max. load: 125 kg (275.6 lb).
2.2
- Min. load: 25 kg (55 lb).
2.3
- Max. height: 3.2 m (10,5’) (with extension bar 3.8m (12,5’)
2.4
- Folded. height: 1.26 m (4,1’)
2.5 -
Transport surface: 1,27x0.27x0.36m (4.17’x0.89’x1.18’).
2.6 -
Shipping dimension: 1,28x0.29x0.18m (4.20’x0.95’x0.59’). (Handle removed)
2.7
- Work surface: 1.50 x 1.50 m (4,90’ x 4,90’)
2.8
- Weight: 21 kg (46 lb)
2.9
- Winch: 450 kg certified.
2.10
- Cable: Steel DIN 3060. Tensile strength 180 kg/mm2. Anti-torsion & anti-corrosion
4 mm cable diameter.
2.11
- Construction material: Steel profiles EN 10305.
2.12
- Three-profile telescopic system operated by steel cable driven by pulleys with
metal protected bearing pads. Adaptor Ø35 mm.
2.13
- Antirust protection priming paint bathed black steel, covered with cured polyester
dust.
