3
•
Power supply: AC110-240V 50/60Hz
•
Power consumption: 80w
•
Source: 8x3w led warm white, 8x3w led red laser, 638nm_500mw
•
LED working lifetime:50000 hours
•
Color temperature: 3200k
•
Channel: 7/9/18/24 four channel mode
•
Laser Pattern: Single thick beam for each laser output
•
Control mode: DMX-512 signal control, auto mode, sound, control mode.
•
Cooling system: fan forced cooling system
•
Working environment: indoor
•
Fixture size: 1070 x 80 x 68 mm
•
Packing size (1in1
）
: 1150 x 160 x 260 mm
•
Net Weight: 8.3kg, Gross Weight: 9.5kg
•
Packing size
（
2in1
）
: 1200 x 390 x 290 mm
Operation Instructions
•
The moving head is for laser purpose.
•
Don’t turn on the fixture if it’s been through severe temperature difference like after
transportation because it might damage the light due to the environment changes. So,
make sure to operate the fixture until it is in normal temperature.
•
This light should be kept away from strong shaking during any transportation or
movement.
•
Don’t pull up the light by only the head, or it might cause damages to the mechanical
parts.
•
Don’t expose the fixture in overheat, moisture or environment with too much dust
when installing it. And don’t lay any power cables on the floor. Or it might cause
electronic shock to the people.
•
Make sure the installation place is in good safety condition before installing the fixture.
•
Make sure to put the safety chain and check whether the screws are screwed properly
when installing the fixture.
•
Make sure the lens is in good condition. It’s recommended to replace the units if there
are any damages or severe scratch.
•
Make sure the fixture is operated by qualified personnel who knows the fixture before
using.
•
Keep the original packages if any second shipment is needed.
Summary of Contents for FOS Glow
Page 1: ...1 FOS Glow...
