6
Please connect XLR-XLR control wire with every light from the output of
DMX.
XLR connection :
ATTENTION: Please do remember to connect one circle circuit plug on
the output signal of last equipment. And this circle circuit plug was
connected a 120ohm resistance between terminals 2 and 3 of the CANON
plug, connect this circle circuit plug can avoid the signal flash phenomena
of signal DMX512 during the transmission.
7 Maintenance
Problems
Check list
Trouble Shooting
The fixture do
not work
1. If your power as same as the
input of the machine.
2. If the fuse was broken.
1. Make sure the voltage.
2. Replace the same
fuse.
LED dimmed
If your power us same as the input
of the machine
Make sure the voltage
input.
