31
7.7.6.
Chase Mode
You can switch the Cue-lists playback between Cue-lists mode or chase mode by pressing
[Chase Mode]
.
7.7.7.
Flash Mode
The function is only used for key-playbacks. The playback key will be used as a flash when you open the function.
7.7.8.
Rename the Playback
Select a playback in the list can rename the playback by option
[Playback Legend]
.
The name of the playback will be shown at the bottom of the screen. You can press the
[Func]
key to switch display
the key-playback name or attribute name on the screen.
7.7.9.
Release Mode
You can set the release mode for playback as follow:
[Freeze All Attribute]
---- All attribute channels will be held except HTP channel;
[Release All Attribute]
---- Resume all attributes to the beginning state;
[Release Only Pan/Tilt]
---- Resume Pan and Tilt to beginning state and hold other attribute channels
except for HTP channel.
7.7.10.
Direction
If it is a Cue-lists playback, press
[Direction]
can set the Cue-lists direction to
‘forward’
or
‘backward’
.
7.7.11.
Run Mode
If there is a Cue playback, you can select one of the modes:
Mode=Time
----
Enable both HTP and LTP times. If the times are set to 0, the value of the HTP channel
depends on the fader position.
Mode=Fader
----
Disables any set times. The values of HTP and LTP channels depend on the fader
position.
7.7.12.
Release Mode
If there is a Cue-lists playback, press
[Loop run]
option can change the run mode into
[Stop in Last Step]
.
7.8.
Reload a Cue
The controller allows you to reload the attribute values of fixtures from one of the whole Cue-lists.
You may load in the values of the needed attributes from one of the cues by option
[Load Cue to
Program]
after selected
[Playback Parameters]
.
At this time, you may find all indicators of attribute keys are on. You may press the attribute keys
to cancel selected so that the non-selected attributes will not be loaded in.
You can select the playback that needs to be reloaded.
If there is a cue playback, the fixtures include in the cue will be selected automatically.
If there is a Cue-lists playback, you may select one of the cues from the Cue-lists and select
[Load
Selected Cue]
. It will return to
‘LIVE SHOW’
and fixtures included in the cue will be selected automatically.
