FOS Technologies AirLink Manual Download

Page: 6 / 9

Press the “Pairing” button on the transmitter box, the yellow indicators on both the transmitter and

receiver will start to flash at the same time. After a few seconds the wireless DMX indicators will stay On,

this means pairing succeeds. Now you can control your fixtures with your lighting desk.

Use AirLink as Transmitter

Connect AirLink to its power adaptor, set it up as transmitter (TX) by pressing down the green button.

Connect AirLink to your lighting desk with XLR cable.

If you are going to control fixtures with wireless DMX receiver, make sure your fixtures are ready to

receive wireless DMX signal.

Now press the “Pairing” button on the transmitter box. The yellow indicators on the transmitter and

your fixtures start to flash at the same time. After a few seconds the wireless DMX indicators will stay

On, this means pairing succeeds. Now you can control your fixtures with your lighting desk.

Summary of Contents for AirLink





