1. Introduction
Thank you for purchasing the Maintenance bypass switch from Forza. This module is used as an external maintenance bypass switch
to provide continuous power without shutting down the connected loads during UPS scheduled maintenance or battery replacement. It
is perfect to use in conjunction with 6K/10KVA UPS systems.
Important safety instructions
You must first read and closely follow all installation and operation instructions contained in this manual. Keep this guide in a safe place
for future reference.
2. Preliminary steps
Unpacking and inspection
Upon opening the box, make sure the following items are included:
• Maintenance bypass switch module
(1)
• Signal control cable
(1)
• Mounting bracket and M4 screw kit
(1)
• User guide
(1)
NOTE:
Carefully inspect the unit before installation. Make sure that nothing inside the package is damaged or loose. Please keep the
original package in a safe place for future use.
3. Product overview
1. Input/ output terminal block (Refer to diagram 2 for details)
2. UPS input breaker on bypass
3. Two-position maintenance bypass switch
4. Output signal control slot
5. Output terminal (to load)
6. UPS output terminal
7. UPS input terminal
8. Utility input terminal
9. Grounding terminal
4. Initial setup
4.1. Rack mount the unit
The bypass switch module can be mounted to a 19-inch rack or enclosure, using he supplied hardware. Refer to the image below.
1
2
3
4
Diagram 1: Rear panel View
Diagram 2: Terminal overview
9 5 6 7 8 9
