Forza 4ZA Cirrus Pro Fast Aero, Owner'S Manual

Page: 19 / 24

4za cirrus tt handlebar | manual | 19
5.5. CABLE ROUTING ELECTRONIC SHIFT CONTROLS
The 4ZA aero kit was designed to run the electric cables full internal. For you to route the cables correctly it is required to disassemble the TT extensions. The exploded view below
shows an example cable routing. Check your setup position first to define which holes and spacers to route the electronic shift controls cables through. Start cable routing at the
dot indicated on the exploded view.
!IMPORTANT!
Pay attention to the exploded view below while running internal cable routing. Make sure not to forget to thread the cable through the extension insert spacer!
Thread a wheel quick release in the bottom of the extension insert spacer to help positioning of the extension insert spacer. The shimano TT interface can be fitted below the top
cover.
extension insert spacer
extension spacer
spacer stack
basebar spacer