SCM8000
15 |ENG
è
Turn the receiving antenna as long as the LOCK- LED lights, or the joists of the signal level
and signal quality are green.
Once a signal is found, the bar graph shows the signal strength and quality. In addition C/N,
SNR, PowerLevel and a.BER (after BER) are displayed. In addition an acoustic signal is
represented.
Notice!
The satellite call sign (see Figure 7) registers which frequency you
receive at the moment.
At some frequency, as for example "474MHz
8M", a wrong frequency call sign is cosent on single transponders,
hence, the announcement can be falsified.
Therefore, we
recommend to leave the setting on the preset first transponder with
the search of a frequency. Therefore the right frequency call sign is
indicated in general always.
è
Set up the satellite antenna exactly to receive the best signal.
Notice!
The C/N value should amount 6dB at least. Values of 10dB and more
are urgently if you liked to have a certain bad weather reserve. Or in
the case if the signal about a multicounter should be distributed to
several buyers.
The higher the C/N value, the better.
The BER value behind “10E” is important. The higher, the better. The
value should be minimal 10E-4. The optimum is > 10E-6.
Installation
Satellite setting
_
Press the MENU button to display the main menu.
_
Pre
ss the ▲
-
or ▼
- button to move the cursor.
_
Select the point
INSTALLATION
and press the OK button