Forward KBLT0011, Assembly Instructions Manual

Page: 10 / 11

Important Information
1. Power supply: AC100V-240V, 50/60Hz
2. Service Environment: 0-104°F
3. Unplug the power plug before cleaning, wipe the dust on surface with damp cloth when cleaning. Be careful
not to let water drops into the internal parts, or loose the connector.
4. Check carefully to ensure correct and complete assembly before using.
5. Be familiar with all functions and program settings of the product before first use.
6. Don’t allow children to play near the desk as their behavior is unpredictable. The manufacturer is not responsible
for loss, injury, or damage due to those improper action.
7. The slight noise caused by the internal mechanism or brake system of the structure, will not have any effect on the
use of the equipment.
8. Do not use corrosive or abrasive materials are near the equipment. Please ensure that the cleaner used will not
pollute the environment.
9
a.Reset: Press the 3 and 4 keys simultaneously, the RST reset indication will appear. Continue to press the “
▼
” down
keys until the lifting table lowers to the lowest position and rebounds to rise to a stop. The display shows the lowest
height “bot”, release “
▼
” down keys, the reset is over and the table can be used normally.
b.when the table doesn’t work and LED shows” E01” or “E02”, pls retry 18mins later.
c.If the “
▼
” button doesn’t work, pls check the cable connection and then cut off the power for at least 10seconds.
Reconnect the power and press “
▼
” keys to start and reset process when it shows the “RST”
d.If the above doesn’t resolve the problem, please contact our after sales team.
Troubleshooting
The following tips will help you detected and eliminate the comman faults and errors. If the fault you met is not listed
below, please contact our after sales team. Only the manufacturer can investigate or resolve faults or errors not listed
below.
Fault phenomenon Method Fault phenomenon Method
No response while long pressing
down arrow after connected with
a power supply
1.Check if all the cables be connected well
2.Contact your supplier or dealer
No response while pressing up
arrow/ down arrow after
connected with a power supply
1.Check if all the cables be connected well
2.Contact your supplier or dealer
Rising in a low speed
1.Check if overloaded, max loading: 110lbs;
2.Contact your supplier or dealer
The motor not move as instructed 1. Contact your supplier or dealer
1.Reposition
2.Contact your supplier or dealer
Go down but not go up
Downward sliding
2.Contact your supplier or dealer
1.Check if overloaded, max loading: 110lbs;
Frequently Reposition
Overwork
（
Duty cycle:Max 2min on/18min OFF
）
2.Contact your supplier or dealer
1.Check if overloaded, max loading: 110lbs;
1.Restart after suspend for 18mins while connecting
with power;
2.Contact your supplier or dealer;
1. Press "M"and "3" together for 3 seconds ormore,
after hearing continuous beeping for twice,it will
restore factory settings
Not enough up&down height
2.Contact your supplier or dealer