HOW TO RECHARGE
CAR OUTPUT
INPUT
AC OUTPUT
AC
●
PV Charge
It’s recommended to use panel provided from Fortune Energy to charge FEM-
PB (FEPM-160NP/CV for PB800 & FEPM-320NP/CV for PB1600).
Users can buy universal solar panels of MC4 connec on standard on their own
to power FEM-PB, as long as the voltage and current (17V/10A for PB800 &
33.6V/10A for PB1600) comply with the specifica ons of FEM-PB. The panel
hall be able to recharge FEM-PB through the MC4 conversion cable. However,
Fortune Energy will not be responsible for providing free repair services for any
damage to the product caused by the quality issue or improper opera on of the
third party solar panels, even during the warranty period.
●
Wall Charge
User can use wall charger provided by Fortune Energy to recharge FEM-PB.
It’s forbidden to use any other wall charger to recharge FEM-PB. Fortune
Energy will not be responsible for providing free repair services for any damage
to the product caused by the quality issue or improper opera on of the third
party wall chargers, even during the warranty period.
●
Car Charge
User can use car charger provided by Fortune Energy to recharge FEM-PB.
It’s forbidden to use any other car charger to recharge FEM-PB. Fortune Energy
will not be responsible for providing free repair services for any damage to the
product caused by the quality issue or improper opera on of the third party
wall chargers, even during the warranty period.
SAFETY GUIDE
1. Keep FEM-PB out of the reach of children and pets.
2. DO NOT touch the metal shell or wall charger during FEM-PB working, charging
and/or under direct-sun.
3. DO NOT allow the ba eries to come into contact with any kind of liquid. DO NOT
leave the ba eries out in the rain or near a source of moisture.
4. Never use or charge swollen, leaky, or damaged FEM-PB. If your FEM-PB is
abnormal, contact Range Storage or authorized dealer for further assistance.
5
.
FEM-PB should be used at temperatures between-20 and 60
℃
. Use in extreme
temperature may severely reduce the performances, reliability and/or safety.
6. DO NOT leave FEM-PB under charging without supervision during long-term.
Disconnect FEM-PB from the power source within 2 hours a er fully charged.
7. DO NOT use FEM-PB in strong electrosta c or electromagne c environments.
8. Never disassemble or pierce FEM-PB in any way.
9. If any electrolytes contact your skin or eyes, immediately wash the contacted
area with fresh running water, and then see a doctor Immediately.
10. DO NOT use FEM-PB if it was involved in a crash or a heavy bump.
11. If FEM-PB falls into water during use, take it out immediately and put it in a safe
and open area. Maintain a safe distance from it un l it is completely dry.
12. DO NOT put FEM-PB in a microwave oven or in a pressurized container.
13. DO NOT place heavy objects on FEM-PB.
14. Clean FEM-PB terminals with a clean, dry cloth.
15. DO NOT reversely connect the posi ve and nega ve terminals of the FEM-PB.
Any abnormal charging of FEM-PB may cause overhea ng, explosion, or fire.
STORAGE
1. Keep FEM-PB out of the reach of children and pets.
2. If a low-ba ery warning appears, charge FEM-PB for long-term storage.
3. DO NOT leave a ba ery near heat sources such as a furnace or heater.
4. Keep FEM-PB in dry and well-ven lated environment (-20
~
45
℃
&10%
~
90%RH)
and
0
~
40
℃
&10%
~
60%RH as op mal.
5. Keep FEM-PB away from metal objects.
6. Please fully charged FEM-PB before storage and recharge at least once every 3
months.
DISPOSAL
1. Dispose of FEM-PB in specific recycling boxes only a er a complete discharge.
Strictly follow local regula ons regarding the disposal and recycling of ba eries.
2. Dispose of a ba ery immediately if it cannot be powered on a er over-
discharging.
