4
DRAINAGE INSTRUCTION
While the tank is full, the compressor and the fan will stop operating, and the tank full indicator will be
on. Please empty the tank.
*Please turn off and unplug the appliance before removing the tank.
1.
Remove the tank carefully.
2.
Empty the tank.
3.
Insert the tank gently back into the appliance.
CONTINUOUS DRAINAGE
1.
Turn off and unplug the appliance, then pull out the tank.
2.
Take off the hose stopper in the tank and plug it in the water outlet. (Fig. 1)
3.
Use a knife or forceps to remove the drain hole. (Fig. 2)
4.
Connect the drain hole with an 12mm inner diameter water tube. (Fig. 3)
* Please purchase the water tube.
Note
The water tube may be frozen in cold weather which will affect the drainage.
Please make sure to install the water tube properly and avoid bending. If the drainage is not
smooth, it may cause water leakage and wet the floors or furnitures.
5.
Put the tank back to its position. Otherwise,
operation cannot be started.
Note
The dehumidifying function will stop immediately after shutdown, but there are a small
amount of water will be discharged from the drain hole. When the appliance is not in use for
a prolonged period, please place it for one day before package and storage.
Do not use the appliance continuously for a long time in order to avoid overheat and cause
mechanical damage or hazard.
Fig. 1
Fig. 2
Fig. 3
Hose stopper
Drain hole
Water tube