manualshive.com logo in svg

Fortress Technologies Ani Wi-Fi, Manual

Share
Download
Fortress Technologies Ani Wi-Fi Manual Download Page 27

25

Add a Smart Outlet

Press and hold the power button on the Smart Outlet for 5 seconds 

(the light will flash then stay off)

Press the     button to enter wireless accessories learning mode (The 
ANI device will say “Zero”)

Press the      button again to add the first outlet. (The ANI device will 

say “One”)

Press either the     or     button to sync the outlet to the device (The 
outlet  will flash several times showing it was successfully 
programmed).

        

Note: If you would like to add another outlet, press the     button 

        vafter the device says “One”. It will move to outlet 2-8.

Press the power button on the Smart Outlet to complete 
programming.

Add a Smart Outlet From the Application

Open the Ani WiFi application
Scroll to “SMART HOME” on your menu bar.
Press and hold the power button on the smart outlet for 5 seconds 
(the light will flash then stay off)
Toggle the on/off switch to send a signal to the outlet (the outlet will 
flash several times showing it was successfully programmed)
    

The panel will also say “One On” or “One Off”

Press the power button on the Smart Outlet to complete 
programming.

Summary of Contents for Ani Wi-Fi
































Reviews:

No comments

Brands by name

Popular brands

Load more brands