12
PERGOLA INSTALLATION: EVOLUTION
4.
Using Evolution Self-Drilling Screws, fasten the F-50
Bracket onto
the Framing Member.
As shown in Fig. 18.
5. Mount the Rafter onto the F-50 Bracket and
Framing
Member
. Be sure the top face of Rafter and
Framing
Member
are flush.
6.
Using Evolution Self-Drilling Screws, fasten the Rafter
onto
the
F-50 Bracket
.
As shown in Fig. 19.
7.
Alternatively, the F-50 Bracket can be flipped and installed
with both faces of the bracket exposed and facing the away
from the Rafter. As shown in Fig. 20.
Tip:
•
Be sure all F-50 Brackets are orientated in the same
direction.
•
Be sure drainage holes on Rafters face down once
installed. As shown in Fig. 21.
Fig. 18
Fig. 17
On-center mark
