background image

 

2

 

FCC Regulations: 

This device complies with part 15 of the FCC Rules. Operation is subject to the 
following 
two conditions: 
1) This device may not cause interference and 
2) This device must accept any interference, including interference that may 
cause 
undesired operation of the device. 
15.21 
You are cautioned that changes or modifications not expressly approved by the 
part 
responsible for compliance could void the user’s authority to operate the 
equipment. 
15.105(b) 
This equipment has been tested and found to comply with the limits for a Class 
B digital 
device, pursuant to part 15 of the FCC rules. These limits are designed to 
provide 
reasonable protection against harmful interference in a residential installation. 
This equipment generates uses and can radiate radio frequency energy and, if 
not 
installed and used in accordance with the instructions, may cause harmful 
interference to 
radio communications. However, there is no guarantee that interference will not 
occur in a 
particular installation. If this equipment does cause harmful interference to radio 
or 
television reception, which can be determined by turning the equipment off and 
on, the 
user is encouraged to try to correct the interference by one or more of the 
following 
measures: 
-Reorient or relocate the receiving antenna. 
-Increase the separation between the equipment and receiver. 
-Connect the equipment into an outlet on a circuit different from that to which 
the receiver 
is connected. 
-Consult the dealer or an experienced radio/TV technician for help.

 

 
 
 
 
 
 
 
 

Summary of Contents for FS-99




















Reviews: