Operation Function
1.
After connecting to a power supply, press the RESET KEY for 2 seconds, you will
hear a buzzer beep for 1 second and full LCD display for 2 seconds.
2.
After displaying the wheel diameter, Eurasian gauge/fat symbol E and unit KM for 1
second (as shown in Figure 2), the console will enter the motion standby screen
(see Figure 3). The values must be reset to 0, then go to LOAD=1 and choose each
setting.
Figure 1
Figure 2
Figure 3
3.
Press MODE key, then press the UP/DOWN key to set a time as shown in figure 4.
Press MODE key, then press the UP/DOWN key to set distance as shown in figure
5. Press MODE key, then press the UP/DOWN key to set the calories as shown in
figure 6.
Figure 4
Figure 5
Figure 6
4.
Press the START/STOP key to start the bike. Press the UP/DOWN to view the
LOAD section as shown in figure 8. Press the START/STOP to stop the bike. Press
the RESET button for to reset the values. Long press the RESET button for 3
seconds to restart.
5.
The selection sequence is MANUAL > BEGINNER > ADVANCE > SPORTY >
CARDIO > WATT and other exercise patterns (in a cycle).
Figure 7
Figure 8
6.
Repeat the steps in this section to adjust BEGINNER, ADVANCE, SPORTY,
CARDIO AND WATT modes.
Summary of Contents for FXT-380A
