Fortis FSUDSKBIKBA, User Manual

Page: 6 / 12

Monitor display
DISPLAY BUTTON:
The display will be blank when not in use. To use, simply start pedalling
and the monitor will display your TIME/ SPEED/ DISTANCE/ CALORIES.
The display will automatically start in SCAN mode. During this mode the SCAN icon on the
left side of the display will be visible and flashing. This mode will cycle you through each of
the display functions as you work out. To leave scan mode, press the display button
(located below the display screen) and release. This will select the next display function.
This function will remain on the display throughout your workout. Press the display button
again to toggle through each of the display functions.
To reset the display, press and hold the display button until the screen fills. Release the
button and the display functions will now be reset to zero.
SCAN:
This function allows the computer to scan or rotate through each workout data
readout automatically (TIME, SPD, DIST, CAL). The scan function is in process when the
SCAN icon is illuminated and flashing on the left side of the display.
TIME:
This function displays the duration of your workout.
SPEED:
Displays your workout speed.
DISTANCE:
This function displays the distance you have traveled during your workout.
CALORIES:
This function displays the calories you have burned during your workout. The
calorie count is based on an average weight; therefore, the results are only an estimate. This
result should not be used for medical purposes.
INSTRUCTION
Note:
The monitor will not function without a CR2032 battery installed.