Folding Instructions
Step One
: Prepare to fold
your bicycle by standing on
the side with the chain. The
chain and crank should be in
front of you.
Step Two
: Move the stem
into the folding position. The
stem should be extended far
enough that the handle bars
sit just under the wheel
axles when the handle post
is extended.
Step Three
: Rotate the
stopper hook away from the
handle post latch.
Step Four
: Unlock the
handle post latch by pulling
it away from the handle
post.
Step Five
: Swing the handle
post into the folded
position, which is upside
down and flush against the
front wheel and frame.
Ensure the front wheel stays
parallel to the handlebars,
sitting just below the wheel
axle.
Step Six
: Open the seat post
quick release and lower the
seat post. Twist the saddle
45 degrees to the left, then
clock the quick release.
Step Seven
: Rotate the
cranks so that the left crank
is pointed forwards and
downward at a 45 degree
angle.
Step Eight
: Move the frame
safety hook to the open
position.
Note: your frame latch
safety hook may be in a
different position than
shown in this image.
Step Nine
: Open the frame
latch lever.
Step Ten
: Fold the frame in
half by swinging the front
half of the frame back until
the two wheels are parallel.
INCORRECT
Saddle is incorrectly
positioned and is butting up
against the handle post.
CORRECT
When you twist the saddle
45 degrees, there should be
some space between the
saddle and the quick release
lever.
Step Eleven
: Snap the
folding pedals into position
by pushing the pedal body
inwards and rotating
downwards.
Step Twelve
: Your bicycle is
now ready for easy
transportation or storage.
If you have any questions regarding the use of
this product, please contact the Kogan.com
customer support team.
3
