8
Wheel Mounting
1.
Place the wheel in a central position between the frame dropouts and the fork.
2.
Install the quick release lever and ensure each side has a spring.
3.
Tighten the adjusting nut.
4.
Close the quick-release system. In order to prevent it coming loose, it is necessary
to turn the adjusting nut such that the closing force of the release lever is at least
12 daN (about 12 Kg).
Note:
The quick-release lever should require a moderate amount of force to close
but not to point where it is extremely difficult to close it.
5.
To increase the closing force: turn the adjusting nut clockwise. Turn anticlockwise
to reduce the force).
Figure 3
Seat Assembly
Insert the seat stem into the frame (Figure 4), you can use grease to help assembly. Insert at
least to the minimal indication on the seat stem using rotary movements. Pull the quick-
release lever free and insert the seat-post to the minimal insertion marker indicated on the
seat-post. Tighten the quick-release clamp and then fold the lever to closed position.
Minimal torque specifications are 19.5Nm.
Figure 4
Closed position
Open position
Force
adjustment
