Firewall Protection Profile
Configuring a protection profile
FortiGate Version 4.0 Administration Guide
01-400-89802-20090424
405
•
Protocol recognition options
You configure protocol recognition options to set the HTTPS content filtering mode and to
select the TCP port numbers that the protection profile monitors for the HTTP, HTTPS,
SMTP, POP3, IMAP, NNTP, and FTP content protocols.
If your FortiGate unit supports SSL content scanning and inspection you can also select
the TCP port numbers for SMTPS, POP3S, and IMAPS. You can also configure the
HTTPS content filtering mode. For more information, see
.
By default the protection profile monitors the default content protocol port numbers (for
example, port 80 for HTTP). You can edit the settings for each content protocol and select
inspection for all port numbers for that protocol, or select one or more port numbers to
monitor for that protocol.
Profile Name
Enter a name for the protection profile.
Comments
Enter a description of the profile. The maximum length is 63 characters.
Protocol Recognition
“Protocol recognition options” on page 405
.
Anti-Virus
“Anti-Virus options” on page 407
IPS
Web Filtering
“Web Filtering options” on page 411
FortiGuard Web Filtering
“FortiGuard Web Filtering options” on page 413
Spam Filtering
“Spam Filtering options” on page 416
.
Data Leak Prevention
Sensor
“Data Leak Prevention Sensor options” on page 419
.
Application Control
“Application Control options” on page 420
Logging
.
Expand Arrow
Summary of Contents for Gate 60D
Page 705: ...www fortinet com...
Page 706: ...www fortinet com...