Hardware installation
Fortinet Technologies Inc.
FPM-7620F status LED is flashing during system operation
Normally, the FPM-7620F Status LED is off when the FPM-7620F is operating normally. If this LED starts flashing while
the module is operating, a fault condition may exist. At the same time the FPM-7620F may stop processing traffic.
To resolve the problem you can try removing and reinserting the FPM-7620F in the chassis slot. Reloading the firmware
may also help.
If this does not solve the problem there may have been a hardware failure or other problem. Contact Fortinet Technical
Support for assistance.
FPM-7620F Processing Module Guide
25
