FortiVoice Gateway 5.3.6 Administration Guide
This topic includes:
•
•
•
Customizing the GUI appearance
Configuring the time and date
The
System > Configuration > Time
tab lets you configure the system time and date of the
FortiVoice Gateway.
You can either manually set the FortiVoice Gateway system time or configure the FortiVoice
Gateway to automatically keep its system time correct by synchronizing with Network Time
Protocol (NTP) servers.
To configure the system time
1.
Go to
System
>
Configuration
>
Time
.
2.
Configure the following:
For many features to work, including scheduling, logging, and certificate-dependent features,
the FortiVoice Gateway system time must be accurate.
FortiVoice Gateway supports daylight savings time (DST), including recent changes in the
USA, Canada and Western Australia.
GUI field
Description
System time
Displays the date and time according to the FortiVoice Gateway’s
clock at the time that this tab was loaded, or when you last selected
the
Refresh
button.
Time zone
Select the time zone in which the FortiVoice Gateway is located.
•
Automatically adjust clock for daylight saving time changes
:
Enable to adjust the FortiVoice Gateway system clock
automatically when your time zone changes to daylight savings
time (DST) and back to standard time.
When selecting time zone in CLI, use the command
config
system time manual
and enter the code before the time zone in
Summary of Contents for FortiVoice GO08
Page 1: ...FortiVoice Gateway GO08 5 3 6 Administration Guide...
Page 66: ......
