Fortinet FortiVoice GO08, Administration Manual

Page: 18 / 66

Fortinet Technologies Inc. Page 18 FortiVoice Gateway 5.3.6 Administration Guide
To view the widget, go to Status > Dashboard. If the widget is not currently shown, click Add
Content , and mark the check box for the widget.
Also see “Viewing the Call Statistics” on page 18 .
System Command widget
The System Command widget lets you restart, shut down, or reload the configuration of the
FortiVoice Gateway unit.
To view the widget, go to Status > Dashboard . If the widget is not currently shown, click Add
Content , and mark the check box for the widget.
Before rebooting or halting the FortiVoice Gateway unit, consider notifying your phone users, as
it could result in temporary interruptions to connectivity.
Reloading allows the FortiVoice Gateway to reload its configuration from its last saved version,
and log you out. Any changes that were in progress but not yet saved, such as GUI pages that
were not applied or CLI commands where you had not yet entered
next
or
end
, are lost. If you
want to continue configuring the FortiVoice Gateway, refresh your browser and log in again.
Viewing the Call Statistics
The Call Statistics tab contains summaries of the number of calls by time and direction that the
FortiVoice Gateway recorded.
To view call statistics, go to Status > Dashboard > Call Statistics .
Using the CLI Console
Go to Status > Dashboard > Console to access the CLI without exiting from the web-based
manager.
You can click the Open in New Window at the bottom of the page to move the CLI Console into
a pop-up window that you can resize and reposition.
Viewing system status
Status > System displays all the ongoing phone calls and trunks.
This topic includes:
• Viewing active calls
• Viewing trunk status
Viewing active calls
Status > System > Active Calls displays all the ongoing phone calls in realtime, including the
callers and receivers, the trunks through which phone calls are connected, the call status, and
the call duration.
You can stop a phone call by clicking the Hang up icon.
The call statuses include:
• Ringing : The receiver’s phone is ringing.
• Connected : Callers are connected. The voice channel is established.
• Voicemail : The call goes to the voicemail.