Appliance Setup
1.
Log in to Supervisor with
Admin
privileges.
2.
Go to
ADMIN > Setup > Collectors
and add a Collector by entering:
a. Name
– Collector name.
b. Guaranteed EPS
– This is the EPS that the Collector will always be able to send. It could send more if there is
excess EPS available.
c. Start Time
and
End Time
– set to
Unlimited
.
3.
SSH to the Collector and run following script to register Collectors:
phProvisionCollector --add <
user
> <
password
> <
Super IP or Host
> <
Organization
>
<
CollectorName
>
a.
Set
user
and
password
use the admin User Name and password for the Supervisor.
b.
Set
Super IP or Host
as the Supervisor's IP address.
c.
Set
Organization
. For Enterprise deployments, the default name is Super.
d.
Set
CollectorName
from
The Collector will reboot during the Registration.
4.
Go to
ADMIN > Health > Collector Health
to see the Collector status.
Service Provider Deployments
For Service Provider deployments, follow these steps.
1.
Log in to Supervisor with
Admin
privileges.
2.
Go to
ADMIN > Settings > System > Event Worker
and enter the IP of the Worker node. Click
OK
.
FortiSIEM 6.1.2 500F Collector Configuration Guide
10
Fortinet Technologies Inc.
