Factory Reset
Factory Reset
Follow the steps below to perform factory reset on FortiSIEM FSM-2000G.
l
Step 1: Uninstall FortiSIEM Application
l
Step 2: Reinstall FortiSIEM Application
Step 1: Uninstall FortiSIEM Application
1.
Connect FortiSIEM device using VGA or Console port.
2.
Login as
root
user with the new password you set in
Step 3: Verify System Information
3.
To check the available FortiSIEM commands, run
sudo get
.
4.
To uninstall FortiSIEM, run
sudo execute fsm-clean
.
This script will uninstall FortiSIEM application.
5.
Reboot the system.
Step 2: Reinstall FortiSIEM Application
1.
Login as
root
with password
ProspectHills
. You will immediately be asked to change your password.
2.
To configure RAID, run
execute format disk
.
3.
To check Hardware status and RAID information, run
diagnose hardware info
.
4.
To install FortiSIEM, run the
factoryreset –-force
command. The command fails after partial steps. Run
the same command again to complete factoryreset.
This script takes a few minutes to complete FortiSIEM installation.
5.
Reboot and run
/user/local/bin/configFSM.sh
to install FortiSIEM.
Follow the steps under
to configure FSM-2000G.
FortiSIEM 6.6.2 2000G Hardware Configuration Guide
24
Fortinet Inc.
