Internet
Ethernet Cables:
Orange - Crossover
Grey - Straight-through
Front
Back
LAN1, LAN2, LAN3
(Network
Connections)
Reset
Switch
ATX
Redundant
Power
Supplies
Power
Connection
Power
Switch
LCD
Panel
Setting
Switches
A and B
LED indicators:
Power, Error, Network,
and Disk Access
Power Cable
Documentation
FortiLog-400
QuickStart Guide
Copyright 2005 Fortinet Incorporated. All rights reserved.
Trademarks
Products mentioned in this document are trademarks.
Power cable connects to power outlet
Straight-through Ethernet cable connects
to hub or switch on the network
FortiLog unit LED Indicators
Light Icon
Description
The FortiLog power indicator. The FortiLog unit is
powered on when the light is on.
Warning light. The light is on when a system or
hardware malfunction occurs.
Network activity. The light flashes as network activity is
occurring on the FortiLog unit.
Hard disk activity. The light flashes as log packets are
written to the FortiLog hard disk, and when the FortiLog
unit access the hard disk to generate reports.
Check that the package contents are complete.
QuickStart Guide
Checking the package contents
1
Things you need to know before installing the FortiLog unit.
You can add the FortiLog unit to your local FortiGate network to receive log messages from your local FortiGate units.
You can also connect the FortiLog unit to the FortiGate units remotely through the Internet or using FortiManager.
To connect the FortiLog unit to the FortiGate units remotely, you must configure the DNS server and the default gateway.
To manage the FortiLog unit, you can use a computer within the local network or over the Internet.
Factory Defaults
Administrator account
User name:
admin
Password:
(none)
Port 1
IP:
192.168.1.99
Netmask:
255.255.255.0
Management Access:
ping, https, ssh, http
Port 2
IP:
192.168.2.99
Netmask:
255.255.255.0
Management Access:
ping, https, ssh, http
Port 3
IP:
192.168.3.99
Netmask:
255.255.255.0
Management Access:
ping, https, ssh, http
Planning the installation
2
Connecting the FortiLog unit
3
Connect the FortiLog unit to a power outlet and to the network hub or switch.
•
Place the FortiLog unit on a stable surface. It requires 1.5 inches (3.75 cm)
clearance on each side to allow for cooling.
•
Make sure the power is not plugged into the wall before connecting the
power cable.
•
The Status light flashes while the unit is starting up and remains lit when the
system is up and running.
© Copyright 2005 Fortinet Incorporated. All rights reserved.
Trademarks
Products mentioned in this document are trademarks or registered trademarks of their respective holders.
Regulatory Compliance
FCC Class A Part 15, CE, and UL
09 September 2005
For technical support please visit http://www.fortinet.com.
FortiLog-400
05-30000-0236-20050909
