Fortinet FortiGate FortiGate-60M, Administration Manual

Page: 225 / 376

Firewall Protection profile
FortiGate-60M Administration Guide 01-28007-0144-20041217
225
Default protection profiles
The FortiGate unit comes preconfigured with four protection profiles.
Protection profile options
Figure 106:Adding a protection profile
You can configure the following options when creating or editing a protection profile.
Strict To apply maximum protection to HTTP, FTP, IMAP, POP3, and SMTP traffic.
You may not wish to use the strict protection profile under normal
circumstances but it is available if you have extreme problems with viruses
and require maximum screening.
Scan To apply virus scanning to HTTP, FTP, IMAP, POP3, and SMTP traffic.
Web To apply virus scanning and web content blocking to HTTP traffic. You can
add this protection profile to firewall policies that control HTTP traffic.
Unfiltered To apply no scanning, blocking or IPS. Use the unfiltered content profile if
you do not want to apply content protection to content traffic. You can add
this protection profile to firewall policies for connections between highly
trusted or highly secure networks where content does not need to be
protected.
Profile Name Enter a name for the profile. (New profiles only.)
Anti-Virus See “Configuring antivirus options” on page 226 .
Web Filtering See “Configuring web filtering options” on page 227 .
Web Category Filtering See “Configuring web category filtering options” on page 227 .
Spam Filtering See “Configuring spam filtering options” on page 228 .
IPS See “Configuring IPS options” on page 229 .
Content Archive See “Configuring content archive options” on page 229 .