Fortinet FortiGate FortiGate-4000, Administration Manual

Page: 178 / 390

178
01-28006-0012-20041105 Fortinet Inc.
CLI configuration Router
config neighbor
edit <id_integer>
show
end
Example
This example shows how to manually add a neighbor.
config router ospf
config neighbor
edit 1
set ip 192.168.21.63
end
end
This example shows how to display the settings for neighbor 1.
config router ospf
config neighbor
edit 1
get
end
This example shows how to display the configuration for neighbor 1.
config router ospf
config neighbor
edit 1
show
end
Note: Only the
ip
keyword is required. All other keywords are optional.
neighbor command keywords and variables
Keywords and
variables Description Default Availability
cost
<cost_integer>
Enter the cost to use for this neighbor. The
valid range for
cost_integer
is 1 to
65535.
10
All models.
ip <address_ipv4>
Enter the IP address of the neighbor. 0.0.0.0 All models.
poll-interval
<seconds_integer>
Enter the time, in seconds, between hello
packets sent to the neighbor in the down
state. The value of the poll interval must be
larger than the value of the hello interval.
The valid range for
seconds_integer
is 1
to 65535.
10
All models.
priority
<priority_integer>
Enter a priority number for the neighbor.
The valid range for
priority_integer
is
0 to 255.
1
All models.