Fortinet FortiGate-620B, Installation Manual

Page: 9 / 62

Introduction Further Reading
FortiGate-620B FortiOS 3.0 MR6 Install Guide
01-30006-83054-20081015
9
• AMC modules – Describes how to install and configure Advanced Mezzanine
Cards for use in the FortiGate unit.
• FortiGate Firmware – Describes how to install, update, restore and test
firmware for the FortiGate device.
Document conventions
The following document conventions are used in this guide:
• In the examples, private IP addresses are used for both private and public IP
addresses.
• Notes and Cautions are used to provide important information:
Typographic conventions
FortiGate documentation uses the following typographical conventions:
Further Reading
The most up-to-date publications and previous releases of Fortinet product
documentation are available from the Fortinet Technical Documentation web site
at
http://docs.forticare.com .
The following FortiGate product documentation is available:
• FortiGate QuickStart Guide
Provides basic information about connecting and installing a FortiGate unit.
Note: Highlights useful additional information.
!
Caution: Warns you about commands or procedures that could have unexpected or
undesirable results including loss of data or damage to equipment.
Convention Example
Keyboard input In the Gateway Name field, type a name for the remote VPN
peer or client (for example,
Central_Office_1
).
Code examples
config sys global
set ips-open enable
end
CLI command syntax
config firewall policy
edit id_integer
set http_retry_count <retry_integer>
set natip <address_ipv4mask>
end
Document names FortiGate Administration Guide
Menu commands Go to VPN > IPSEC > Phase 1 and select Create New.
Program output
Welcome!
Variables
<address_ipv4>