manualshive.com logo in svg

Fortinet FortiGate 3600A, Installation Manual

Share
Download
Fortinet FortiGate 3600A Installation Manual Download Page 56

FortiGate-3600A FortiOS 3.0 MR6 Install Guide

56

01-30006-0457-20080318

Testing new firmware before installing

FortiGate Firmware

To test the new firmware image

1

Connect to the CLI using a RJ-45 to DB-9 or null modem cable. 

2

Make sure the TFTP server is running.

3

Copy the new firmware image file to the root directory of the TFTP server.

4

Make sure the internal interface is connected to the same integer as the TFTP 
server.

You can use the following command to ping the computer running the TFTP 
server. For example, if the TFTP server’s IP address is 192.168.1.168:

execute ping 192.168.1.168

5

Enter the following command to restart the FortiGate unit:

execute reboot

6

As the FortiGate unit reboots, press any key to interrupt the system startup. As the 
FortiGate unit starts, a series of system startup messages appears.
When the following messages appears:

Press any key to display configuration menu....

7

Immediately press any key to interrupt the system startup.

If you successfully interrupt the startup process, the following messages appears:

[G]: Get firmware image from TFTP server.
[F]: Format boot device.
[Q]: Quit menu and continue to boot with default
firmware.
[H]: Display this list of options.

Enter G, F, Q, or H:

8

Type G to get the new firmware image from the TFTP server.

The following message appears: 

Enter TFTP server address [192.168.1.168]:

9

Type the address of the TFTP server and press Enter: 

The following message appears:

Enter Local Address [192.168.1.188]:

10

Type an IP address of the FortiGate unit to connect to the TFTP server. 

The IP address must be on the same network as the TFTP server, but make sure 
you do not use the IP address of another device on the network.

The following message appears:

Enter File Name [image.out]:

Note: 

You have only 3 seconds to press any key. If you do not press a key soon enough, 

the 

FortiGate

 unit reboots and you must login and repeat the 

execute reboot 

command.

Summary of Contents for FortiGate 3600A

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands